Display tray for 24 booster packs
Shelf-ready display tray
- Sized for
- 24 × Sealed Pokémon trading card booster pack
- Product
- 120 × 66 × 4 mm, ×24 (estimate)
- Inside
- 102 × 70 × 124 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 353 × 321 mm
Make this box About the shelf-ready display tray
Folded shut and measured in 3D: the cavity is 121.8 × 102 × 68.5 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Twenty-four trading card booster packs standing in a row, the counter display format. A sealed pack is about 120 × 66 × 4 mm; packs differ per game, so check yours.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Display tray for 24 booster packs: from a general reference site, not the manufacturer.
“Modern 10 card pack - W 66mm x L 120mm x D 4mm (D could be 3mm if snug)”
elitefourum.com
The flat blank
- Four corner tray: the walls fold up, the corner tabs swing round and glue to the inside of the long walls.
- The corner tab sits 1.5 mm inside the wall - exactly one caliper - and starts 1.5 mm above the floor so it clears the base board.
- The short walls are inset by 1.5 mm at both ends so they stand inside the long walls.
- This construction needs glue. Pick a slotted tray if there is no gluer available.
- Shelf-ready front: a 58 x 62 mm opening in the front wall, bevelled 10 mm at the lower corners. 62 mm of wall stays below it.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.