Box for wide instant photos
Telescope box · FEFCO 0301
- Sized for
- 20 × Instax Wide instant film print
- Product
- 108 × 85 × 1 mm, ×20 (estimate)
- Inside
- 110 × 87 × 24 mm
- Board
- FBB / GC2 board 400 gsm (0.55 mm)
- Blank
- 324 × 136 mm
Make this box About the telescope box
Folded shut and measured in 3D: the cavity is 110 × 87 × 24 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Twenty Instax Wide prints (108 × 85 mm). About 1 mm per print is our estimate.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Wide instant photos: from the manufacturer's published specification.
“instax WIDE: Print size 108 x 85mm”
instax.co.uk
The flat blank
- Telescope box: two trays, lid over base. Both pieces sit on one blank and are die-cut together.
- The lid is 2.1 mm wider internally than the base: 1.1 mm for the base board plus 1.0 mm working clearance.
- Lid height 20 mm over a 24 mm base.
- Both pieces have glued corners.
- WARNING: the lid is 4 mm shorter than the base, so 4 mm of the base wall stays exposed and the box does not close flush. Raise the lid height to at least the base height for a closed box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.