Box types
43 presets built from eleven generators. Every thumbnail below is the actual dieline, drawn from the same code that writes your file.
Looking for a code? FEFCO codes explained. Sizing a box for a specific item? Boxes for things.
Mailers
Mailer box
FEFCO 0427The e-commerce standard. Rolled side walls, ear lock, no glue.
Mailer with slot lock
FEFCO 0427Tabs through slots in the front wall. Closes tighter, a little more knife work.
Flat mailer
FEFCO 0427Low and wide, for clothing, prints and books.
Mailer without dust flaps
FEFCO 0427Less board and a narrower blank; the side wall becomes double instead of triple.
Mailer for tape
FEFCO 0427Plain flap without a lock, closed with tape or a sticker.
Book wrap
One flat piece folds around a book: two lids over the top, end flaps over both.
Record wrap (12 inch)
Square book wrap for one to three LPs in their sleeves.
Book wrap with overlapping lids
Lids meet in the middle with an overlap: less board for an A4 book or a stack of prints.
Shipping boxes
Regular slotted box
FEFCO 0201The classic carton. Major flaps meet in the middle.
Full overlap box
FEFCO 0203Flaps overlap completely. Double base, strong against push-through.
Open shipping tray
FEFCO 0200Half slotted: open top. Use as a tray or with a separate lid.
Overlap slotted box
FEFCO 0202Flaps overlap partly. Middle ground between RSC and full overlap.
Long narrow box
FEFCO 0201For profiles, tubes and framed work.
Cube box
FEFCO 0201Equal sided. The most board-efficient shape per litre of volume.
Trays
Glued corner tray
Base with four upright walls. The basis for display and produce.
Low display tray
Flat, for the shelf or inside a display unit.
Takeaway box with hinged lid
Clamshell food box: a glued tray with a lid on the back wall that closes over the outside.
Burger box
Square clamshell with a deep lid, sized for one burger.
Cake box with window
Square clamshell with a rounded window in the lid, for a cake or pastries. Clear film goes behind the window.
Deep storage tray
Tall walls, for bulk or loose parts.
Shelf-ready display tray
Lowered front so the product shows and can be taken from the shelf.
Counter display tray
Small open-front tray for the till: sweets, cards, small accessories.
Two piece
Telescope box
FEFCO 0301The shoebox: lid over base, both pieces on one blank.
Flat telescope box
FEFCO 0301Low lid on a low base. For shirts, prints and documents.
Telescope with deep lid
FEFCO 0301Lid almost as tall as the base: double wall all the way round.
Folding cartons
Reverse tuck carton
ECMA A20.20.03.01Glued tube with tuck flaps. Nests economically on the sheet.
Reverse tuck, rounded flaps
ECMA A20.20.03.01Reverse tuck with radiused tuck flaps, written as arcs in the SVG, DXF and PDF.
Gable box with handle
Roof panels meet in a carry handle with a hand hole; crash-lock bottom.
Straight tuck carton
ECMA A20.20.03.03Both flaps point the same way: a cleaner front face.
Tall slim carton
ECMA A20.20.03.01For bottles, tubes and long products.
Flat card carton
ECMA A20.20.03.01Shallow, for cards, jewellery and small accessories.
Crash-lock bottom carton
ECMA A60.20.00.03Auto-bottom: glued flat, the floor drops into place when you open it. Tuck top.
1-2-3 snap-lock bottom carton
ECMA A55.20.01.03Locking floor without glue: three folds and the tabs hold it. Tuck top.
Triangular carton
ECMA C10.10.20.20Three walls glued into a tube, a triangular lid with a tuck flap at each end.
Long triangular carton
ECMA C10.10.20.20Slim prism for long bars, pencils and rolled prints.
Hexagonal carton
ECMA C10.40.20.20Six walls with a tuck lid at both ends. For jars, candles and gifts.
Tall hexagonal carton
ECMA C10.40.20.20Six-sided tube for a bottle or a tall candle.
Sleeves
Sleeve
ECMA A01.01.00.00Band of four faces, open top and bottom. Fully printable.
Sleeve with window
ECMA A01.01.00.00Cut-out in the front face so the product stays visible.
Narrow belly band
ECMA A01.01.00.00Low band around a tray or a bundle of products.