Hexagonal box for three hockey pucks
Hexagonal carton · ECMA C10.40.20.20
- Sized for
- 3 × ice hockey puck (NHL official rules, Rule 13)
- Product
- Ø76.2 × 25.4 mm, ×3
- Inside
- undefined × 79 × 80 mm
- Board
- Kraft / GD2 board 400 gsm (0.50 mm)
- Blank
- 289 × 288 mm
Make this box About the hexagonal carton
Folded shut and measured in 3D: the cavity is 79 × 80 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Three regulation pucks (3 inches across, 1 inch thick) stacked in a hexagonal carton 79 mm across the flats.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Hexagonal box for three hockey pucks: from a published standard or format specification.
“13.1 Dimensions - The puck shall be made of vulcanized rubber, or other approved material, one inch (1'') thick and three inches (3'') in diameter and shall weigh between five and one-half ounces (5 1/2 oz.) ...”
nhl.com
The flat blank
- Hexagonal tuck carton (ECMA C10.40.20.20): six walls glued into a tube, a hexagonal closing panel with a tuck flap at each end.
- The walls fold 60 degrees each. Every closing-panel edge except the hinge is 0.57 mm inside the wall, so the tuck flap slides down behind its wall without rubbing.
- The tuck flaps go behind different walls, and never behind the one with the glue flap.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.