Hexagonal box for a bath bomb
Hexagonal carton · ECMA C10.40.20.20
- Sized for
- standard bath bomb, sphere mold
- Product
- Ø63 × 63 mm (estimate)
- Inside
- undefined × 66 × 67 mm
- Board
- Kraft / GD2 board 400 gsm (0.50 mm)
- Blank
- 244 × 246 mm
Make this box About the hexagonal carton
Folded shut and measured in 3D: the cavity is 66 × 67 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A 2.5-inch (63 mm) bath bomb in a hexagonal carton 66 mm across the flats: the ball touches all six walls and cannot roll.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Hexagonal box for a bath bomb: from a packaging or retail supplier's listing.
“2.5 Inch (63mm) Sphere Mold. This is generally accepted as the bath bomb industry standard size.”
bathbombmachine.com
The flat blank
- Hexagonal tuck carton (ECMA C10.40.20.20): six walls glued into a tube, a hexagonal closing panel with a tuck flap at each end.
- The walls fold 60 degrees each. Every closing-panel edge except the hinge is 0.57 mm inside the wall, so the tuck flap slides down behind its wall without rubbing.
- The tuck flaps go behind different walls, and never behind the one with the glue flap.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.