Shoebox for sneakers
Telescope box · FEFCO 0301
- Sized for
- men's US size 10 sneaker (typical shoebox inside, e.g. Nike)
- Product
- 340.4 × 238.8 × 119.4 mm (estimate)
- Inside
- 342 × 241 × 121 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 1057 × 486 mm
Make this box About the telescope box
Folded shut and measured in 3D: the cavity is 342 × 241 × 121 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A shoebox for a pair of men's US 10 sneakers, the size of the typical brand shoebox inside. Measurements are a guide.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Shoebox for sneakers: from a general reference site, not the manufacturer.
“approximately 34.0 cm (13.4 in) long, 23.8 cm (9.4 in) wide, and 12.0 cm (4.7 in) high”
footonboot.com
The flat blank
- Telescope box: two trays, lid over base. Both pieces sit on one blank and are die-cut together.
- The lid is 4.5 mm wider internally than the base: 3.0 mm for the base board plus 1.5 mm working clearance.
- Lid height 54.45 mm over a 121 mm base.
- Both pieces have glued corners.
- WARNING: the lid is 67 mm shorter than the base, so 67 mm of the base wall stays exposed and the box does not close flush. Raise the lid height to at least the base height for a closed box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.