Divider for sixteen chocolate truffles
Slotted partition
- Sized for
- 16 × chocolate truffle
- Product
- Ø25 × 25 mm, ×16 (estimate)
- Inside
- 110 × 110 × 15 mm
- Board
- Kraft / GD2 board 400 gsm (0.50 mm)
- Blank
- 108 × 120 mm
Make this box About the slotted partition
Folded shut and measured in 3D: the cavity is 27.1 × 27.1 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Sixteen 25 mm truffles in a 4 by 4 grid. Each cell is 2 mm wider than the truffle; the strips stand 15 mm, so the truffles are easy to pick out. The length and width are the inside of the gift box the insert goes in.
Food. If the food touches the board, ask your board supplier for food-contact grade board. The drawing sets the shape; it does not make the board food-safe.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Divider for sixteen chocolate truffles: from a packaging or retail supplier's listing.
“Pastry Chef's Boutique Belgian Chocolate Truffle Shells Dark Chocolate Hollow Form for making Bon Bon - Ø25mm - 504 pces”
amazon.com
The flat blank
- Partition for a box of 110 x 110 mm inside: 4 x 4 cells of 27.1 x 27.1 mm, 15 mm high.
- 3 long strips of 108.0 mm, slotted from the top; 3 cross strips of 108.0 mm, slotted from the bottom. Slide the cross strips down over the long ones.
- Slots 0.8 mm wide (board + 0.3 mm), half the height deep. Every strip is 1 mm short at each end so the set drops into the box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.