Divider for six essential oil bottles
Slotted partition
- Sized for
- 6 × 10 ml euro dropper bottle, amber boston round
- Product
- Ø24.7 × 60.3 mm, ×6
- Inside
- 82 × 54 × 36 mm
- Board
- Kraft / GD2 board 400 gsm (0.50 mm)
- Blank
- 80 × 120 mm
Make this box About the slotted partition
Folded shut and measured in 3D: the cavity is 27 × 26.8 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Six 10 ml euro dropper bottles, 3 by 2, the starter-set format. The bottle is 24.7 mm across; 2 mm of play per cell.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Divider for six essential oil bottles: from a packaging or retail supplier's listing.
“Diameter (in): 0.973, Height (in): 2.375”
containerandpackaging.com
The flat blank
- Partition for a box of 82 x 54 mm inside: 3 x 2 cells of 27.0 x 26.8 mm, 36 mm high.
- 1 long strip of 80.0 mm, slotted from the top; 2 cross strips of 52.0 mm, slotted from the bottom. Slide the cross strips down over the long ones.
- Slots 0.8 mm wide (board + 0.3 mm), half the height deep. Every strip is 1 mm short at each end so the set drops into the box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.