Box for a 50 ml cream jar
1-2-3 snap-lock bottom carton · ECMA A55.20.01.03
- Sized for
- 50 ml cosmetic cream jar, amber glass
- Product
- Ø57.2 × 46.2 mm
- Inside
- 59 × 59 × 48 mm
- Board
- SBS / GC1 board 350 gsm (0.45 mm)
- Blank
- 252 × 183 mm
Make this box About the 1-2-3 snap-lock bottom carton
Folded shut and measured in 3D: the cavity is 59 × 58.5 × 48.5 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A 50 ml cream jar is wide and low (57.2 × 46.2 mm). A 1-2-3 snap-lock bottom carries the glass better than a tuck bottom and needs no glue.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
A 50 ml cream jar: from a packaging or retail supplier's listing.
“Height: 1.82" Width: 2.25"”
premiumvials.com
The flat blank
- 1-2-3 snap-lock bottom: fold the two minor flaps in, then the front major, then the back major, pushing its two tabs in under the front major as the front tongue goes under the back one. No glue.
- Tuck top: the closing panel and tuck flap on the back panel.
- The tuck flap is 0.60 mm narrower on each side than the closing panel - a full caliper plus clearance - so it slides past the side walls and the glue seam.
- Closing order: dust flaps in, closing panel over them, tuck flap behind the wall.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.