Divider for four quart mason jars
Slotted partition
- Sized for
- 4 × quart (32 oz) regular mouth mason jar (Ball)
- Product
- Ø98.4 × 201.6 mm, ×4
- Inside
- 207 × 207 × 121 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 205 × 248 mm
Make this box About the slotted partition
Folded shut and measured in 3D: the cavity is 102.8 × 102.8 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Four 32 oz regular-mouth jars, 2 by 2. Each cell is 4 mm wider than the jar (98.4 mm), and the strips stand to 60 % of the jar height.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Divider for four quart mason jars: from a packaging or retail supplier's listing.
“Height: 7 15/16 Inches; Maximum Diameter: 3 7/8 Inches”
webstaurantstore.com
The flat blank
- Partition for a box of 207 x 207 mm inside: 2 x 2 cells of 102.8 x 102.8 mm, 121 mm high.
- 1 long strip of 205.0 mm, slotted from the top; 1 cross strip of 205.0 mm, slotted from the bottom. Slide the cross strips down over the long ones.
- Slots 1.8 mm wide (board + 0.3 mm), half the height deep. Every strip is 1 mm short at each end so the set drops into the box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.