Box for six cupcakes
Glued corner tray
- Sized for
- 6 × standard cupcake liner / baked cupcake
- Product
- Ø50.8 × 31.8 mm, ×6 (estimate)
- Inside
- 156 × 106 × 62 mm
- Board
- SBS / GC1 board 350 gsm (0.45 mm)
- Blank
- 281 × 231 mm
Make this box About the glued corner tray
Folded shut and measured in 3D: the cavity is 156 × 106 × 61.3 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Six standard cupcakes in their liners, 3 by 2, with 30 mm for the frosting. Close with a sleeve or a lid.
Food. If the food touches the board, ask your board supplier for food-contact grade board. The drawing sets the shape; it does not make the board food-safe.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Six cupcakes: from a general reference site, not the manufacturer.
“The standard brown cupcake liners all have a base of 2″ and come in 3 different heights: 2″x 1 1/4″ (aka 'Std') – these are the standard height of your typical cupcake liner”
bakersstock.com
The flat blank
- Four corner tray: the walls fold up, the corner tabs swing round and glue to the inside of the long walls.
- The corner tab sits 0.45 mm inside the wall - exactly one caliper - and starts 0.45 mm above the floor so it clears the base board.
- The short walls are inset by 0.45 mm at both ends so they stand inside the long walls.
- This construction needs glue. Pick a slotted tray if there is no gluer available.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.