Divider for twelve miniature bottles
Slotted partition
- Sized for
- 12 × 50 ml miniature liquor bottle (nip), PET
- Product
- Ø32 × 105 mm, ×12
- Inside
- 142 × 106 × 63 mm
- Board
- Kraft / GD2 board 400 gsm (0.50 mm)
- Blank
- 140 × 339 mm
Make this box About the slotted partition
Folded shut and measured in 3D: the cavity is 35.1 × 35 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Twelve 50 ml miniatures in a 4 by 3 grid, the tasting-set format. Each bottle is 32 mm across; 3 mm of play per cell lets them drop in without sticking.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Divider for twelve miniature bottles: from a packaging or retail supplier's listing.
“105 mm (H) 32 mm (D)”
sks-bottle.com
The flat blank
- Partition for a box of 142 x 106 mm inside: 4 x 3 cells of 35.1 x 35.0 mm, 63 mm high.
- 2 long strips of 140.0 mm, slotted from the top; 3 cross strips of 104.0 mm, slotted from the bottom. Slide the cross strips down over the long ones.
- Slots 0.8 mm wide (board + 0.3 mm), half the height deep. Every strip is 1 mm short at each end so the set drops into the box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.