Divider for six Burgundy bottles
Slotted partition
- Sized for
- 6 × 750 ml Burgundy wine bottle
- Product
- Ø76.8 × 295 mm, ×6
- Inside
- 246 × 164 × 177 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 244 × 543 mm
Make this box About the slotted partition
Folded shut and measured in 3D: the cavity is 81.3 × 81 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Burgundy bottles have sloping shoulders and are wider at the base than a Bordeaux bottle (76.8 mm). Six cells, 3 by 2, each 4 mm wider than the bottle; the strips stand 60 % of the bottle height, below the shoulder. The size entered is the inside of the shipping box.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Divider for six Burgundy bottles: from a packaging or retail supplier's listing.
“Average height: 295 ± 5 ... Average Max Diameter (mm): 76.8 ± 1.9 (Burgundy style)”
glasscraftbottle.com
The flat blank
- Partition for a box of 246 x 164 mm inside: 3 x 2 cells of 81.0 x 81.3 mm, 177 mm high.
- 1 long strip of 244.0 mm, slotted from the top; 2 cross strips of 162.0 mm, slotted from the bottom. Slide the cross strips down over the long ones.
- Slots 1.8 mm wide (board + 0.3 mm), half the height deep. Every strip is 1 mm short at each end so the set drops into the box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.