Box for a PS5 controller
Regular slotted box · FEFCO 0201
- Sized for
- PlayStation 5 DualSense controller
- Product
- 160 × 106 × 66 mm (estimate)
- Inside
- 176 × 122 × 82 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 637 × 204 mm
Make this box About the regular slotted box
Folded shut and measured in 3D: the cavity is 175.8 × 122 × 85 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A DualSense (about 160 × 106 × 66 mm) in an RSC with 8 mm of padding. Measurements from a reference site, not Sony: check before use.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
A PS5 controller: from a general reference site, not the manufacturer.
“height of 4.2" (106 mm), width of 6.3" (160 mm), depth of 2.6" (66 mm)”
dimensions.com
The flat blank
- Regular Slotted Container (FEFCO 0201): the major flaps meet in the middle.
- Slot width = 1.90 mm (caliper plus clearance). Any narrower and the corner tears when folded.
- Glue flap 35 mm on long wall 1; glue it to the inside of end wall 2.
- Flutes run vertically, along the height: maximum stacking strength.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.