Box for a champagne bottle
Regular slotted box · FEFCO 0201
- Sized for
- 750 ml champagne bottle
- Product
- Ø88.9 × 330 mm (estimate)
- Inside
- 99 × 99 × 340 mm
- Board
- C-flute corrugated (4.0 mm)
- Blank
- 447 × 444 mm
Make this box About the regular slotted box
Folded shut and measured in 3D: the cavity is 340 × 99 × 99 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
Champagne bottles are thicker (heavier glass for the pressure) than wine bottles: a wine box does not fit them.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
A champagne bottle: from a general reference site, not the manufacturer.
“Height: 13" (33 cm); Diameter: 3.5" (8.9 cm)”
dimensions.com
The flat blank
- Regular Slotted Container (FEFCO 0201): the major flaps meet in the middle.
- Slot width = 5.00 mm (caliper plus clearance). Any narrower and the corner tears when folded.
- Glue flap 35 mm on long wall 1; glue it to the inside of end wall 2.
- Flutes run vertically, along the height: maximum stacking strength.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.