Box for an A5 ring planner
Telescope box · FEFCO 0301
- Sized for
- Filofax Original A5 organiser
- Product
- 235 × 191 × 40 mm
- Inside
- 239 × 195 × 44 mm
- Board
- FBB / GC2 board 400 gsm (0.55 mm)
- Blank
- 622 × 284 mm
Make this box About the telescope box
Folded shut and measured in 3D: the cavity is 239 × 195 × 44 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A closed A5 ring organiser is 235 mm high, 191 mm wide and 40 mm thick: larger than its A5 pages because of the rings and the cover.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
An A5 ring planner: from the manufacturer's published specification.
“Height: 235mm / 9-1/4 in, Width: 191mm / 7-1/2 in, Depth: 40mm / 1-5/8 in”
us.filofax.com
The flat blank
- Telescope box: two trays, lid over base. Both pieces sit on one blank and are die-cut together.
- The lid is 2.1 mm wider internally than the base: 1.1 mm for the base board plus 1.0 mm working clearance.
- Lid height 20 mm over a 44 mm base.
- Both pieces have glued corners.
- WARNING: the lid is 24 mm shorter than the base, so 24 mm of the base wall stays exposed and the box does not close flush. Raise the lid height to at least the base height for a closed box.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.