Box for a reed diffuser bottle
1-2-3 snap-lock bottom carton · ECMA A55.20.01.03
- Sized for
- 100 ml reed diffuser bottle, round glass
- Product
- Ø69 × 79 mm
- Inside
- 73 × 73 × 85 mm
- Board
- FBB / GC2 board 400 gsm (0.55 mm)
- Blank
- 308 × 246 mm
Make this box About the 1-2-3 snap-lock bottom carton
Folded shut and measured in 3D: the cavity is 85.5 × 73 × 73 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
A 100 ml round glass diffuser bottle (69 × 79 mm). The reeds are longer than the bottle: pack them flat beside it or in their own sleeve.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
A reed diffuser bottle: from a packaging or retail supplier's listing.
“Size - Diameter: 69mm Height: 79mm with screw top.”
mysticmomentsuk.com
The flat blank
- 1-2-3 snap-lock bottom: fold the two minor flaps in, then the front major, then the back major, pushing its two tabs in under the front major as the front tongue goes under the back one. No glue.
- Tuck top: the closing panel and tuck flap on the back panel.
- The tuck flap is 0.70 mm narrower on each side than the closing panel - a full caliper plus clearance - so it slides past the side walls and the glue seam.
- Closing order: dust flaps in, closing panel over them, tuck flap behind the wall.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.