Book wrap for an A4 sketchbook
Book wrap
- Sized for
- Seawhite A4 landscape hardback sketchbook
- Product
- 302 × 217 × 15 mm
- Inside
- 308 × 223 × 19 mm
- Board
- E-flute corrugated (1.5 mm)
- Blank
- 497 × 715 mm
Make this box About the book wrap
Folded shut and measured in 3D: the cavity is 308 × 223 × 19 mm and the product block fits without touching the board. Free to open and change; €2.50 for the PDF, €3.50 for the DXF or SVG.
Why these numbers
An A4 landscape hardback sketchbook (302 × 217 × 15 mm). The wrap folds around it and needs no tape on the corners.
Every size on this page is an example to start from. Products change between models, editions and makers, so measure the one you are packing.
Where the product size comes from
Book wrap for an A4 sketchbook: from a packaging or retail supplier's listing.
“30.2 x 21.7 x 1.5cm”
fredaldous.co.uk
The flat blank
- Book wrap: lay the product on the base, fold the back wall and lid over it, then the front wall and lid, then both end walls with their flaps over the lids. Tape each end flap down.
- Both lids cover the whole top, so the top is two boards thick.
- Walls step up one board per layer: back 20.5, front 22.0, ends 23.5 mm for an inside height of 19.0 mm.
- End flaps 70 mm. The long walls are 1.5 mm short at each end so the end walls fold outside them.
More boxes like this
Product and brand names are used only to say what the box is sized for. They belong to their owners; CardboardShaper is not affiliated with or endorsed by any of them.